Automated Building Reporting

Admin

Report #216

Back to Past Reports
Report Details
Date: -
Client: -
Address: -
Reference: -
Technical Officer: -
Created: 19/01/2026 10:32:22
Report Entries
Rainwater Goods Defects
Button: Leaking
Text: Some sections were noted to be stained and possibly leaking, indicating the need for resealing to prevent further deterioration
Button: Rusting
Text: Corrosion was observed to parts of the rainwater goods. Appropriate repairs and treatment are recommended to prevent further decay
Button: Missing
Text: Missing sections were noted to the rainwater fittings. These should be reinstated or replaced to restore effective rainwater disposal
Button: Loose
Text: Loose sections were noted to the rainwater fittings. These should be properly secured through repair or replacement to prevent detachment or leakage
Button: Broken
Text: Broken sections were noted to the rainwater fittings. These should be repaired or replaced to restore effective performance and prevent water damage
Button: Poorly Aligned
Text: Poor alignment was noted to sections of the rainwater fittings. Realignment, repair, or replacement is required to restore correct falls and efficient drainage
Button: Blocked
Text: The fittings are obstructed by debris and vegetation and need to be cleared to prevent blockages and potential overflow
Button: Discharge onto Flat Roof
Text: The downpipe currently discharges directly onto the flat roof, which may cause deterioration of the roof coverings and potential water ingress. This setup should be modified to prevent further damage
Button: UV Affected
Text: The components have suffered from prolonged UV degradation and are now brittle — replacement is recommended
Button: No Rainwater Goods
Text: There are no rainwater goods to the property, which may result in dampness within the building. Suitable rainwater fittings should be installed to direct surface water away from the structure
Button: Poor Replace
Text: The rainwater fittings are in poor condition and should be replaced to ensure effective drainage
Button: Asbestos Replace
Text: Sections of the rainwater fittings appear to contain asbestos and should now be replaced. This presents a potential safety risk. Before any work is undertaken on asbestos-containing materials, a suitable risk assessment must be carried out by a competent person
Button: Leaking Replace
Text: The rainwater fittings are leaking and now require repair or replacement to ensure proper drainage
Button: Blocked & Damp
Text: Some downpipes are in poor condition and are causing associated damage. Repairs are now required to prevent further deterioration
Button: Finlock Sagging
Text: The concrete rainwater goods show signs of sagging above the window openings. Further investigation should be undertaken by a Chartered Structural Engineer to assess their structural stability
Button: Finlock Leaking
Text: Leakage was noted to the concrete rainwater goods. Urgent remedial works are necessary to prevent additional deterioration or water ingress
Button: Finlock Lining Not Visible
Text: This type of gutter arrangement is an integral part of the building structure as well as rainwater component. I have not been able to inspect the gutter linings and a close inspection is now needed to determine their condition and structural adequacy
Button: Undersized
Text: The existing rainwater goods appear inadequate for the roof area served and are likely to overflow in heavy rain. Replacement with higher-capacity guttering is recommended to ensure effective rainwater disposal
Button: Not Enough Downpipes
Text: There are insufficient downpipes to adequately drain the guttering at the property, which could result in overflowing during periods of heavy rainfall. Higher-capacity guttering or additional downpipes should be installed to improve rainwater disposal
Button: Poorly Supported
Text: Sections of the rainwater fittings lack adequate support, resulting in misalignment. Additional fixings and realignment are recommended to restore correct falls and stability